Thorough Guide to Solve TP Link Firmware Update Stuck Issue
TP-Link wireless range extenders are one of the best devices to boost existing signals. They let their users access the internet 24×7. But, at times, they fail to obey orders. Many users have reported that they are having a hard time with their extenders, especially while performing TP Link firmware update. The firmware gets stuck every time the process is being executed manually.
Is it the same issue that you are facing with your TP Link wireless extender? Nodding your head in yes? Well, worry not. Follow the fixes mentioned in this post and get to know how to get your extender dancing to its tunes within minutes.
[Solved] TP Link Firmware Update Stuck Issue
1. Check the Ethernet Connection
Did you not pay attention to the condition of the Ethernet cable while connecting your devices during the TP Link extender setup process? Well, if not, then it is quite obvious why you are paying for it now.
To take care of this issue, it is recommended that you swap your existing cable with a non-damaged one. Right after that is done; perform TP Link firmware update manually. Are you able to? No? Move to the next fix without any further ado.
2. Download the Correct Version
Another reason why you are stuck with the TP Link firmware update stuck issue is because you did not download the correct firmware version for your device. In other words, the firmware of the model that was downloaded isn’t compatible with your extender.
To troubleshoot the issue, do you know what we recommend? The next time you update the firmware of your device, ensure that the correct version is getting downloaded. Keep things correct from your end, the rest will fall into place on its own.
3. Keep WiFi Interference at Bay
If your TP Link range extender’s WiFi signals are getting interrupted or blocked, that can also cause the firmware to get stuck. Therefore, eliminate WiFi interference by keeping your extender from the following devices and appliances:
- Microwave ovens
- Cordless phones
- Bluetooth speakers
- Baby monitors
- Washing machines
Now, check again if the issue that you are facing has been resolved or not. Still, got no luck? Well then, that might be because of an inadequate power supply.
4. Verify the Power Supply
Many users don’t realize that apart from a weak internet connection and WiFi interference, the TP Link firmware update stuck issue can be because of an improper proper supply. This might be because of a damaged power socket.
Yes, we agree that this reason might not be a major one behind the issue, but it is still a reason. Think about it, if your extender is not getting an adequate power supply, how on earth will it function properly? Not possible, right?
Thus, we recommend that you get your wall socket repaired. If doing so does not bear any fruit for you, then plug your extender into a different one.
After following these troubleshooting hacks, are you still not able to perform TP Link firmware update using the manual method? Well, you need to opt for the TP Link app then.
TP Link Firmware Update via TP Link App
Here is how you can upgrade the firmware of your TP Link extender via the TP Link app:
- Launch the TP Link app on your mobile application.
- Tap the SIGN IN button.
- You will be asked to enter the admin details.
- Thus, insert the login credentials of your extender and hit Log In.
- Under the Settings menu, you will come across the Firmware Update option.
- Tap the Firmware Update button and follow the on-screen prompts.
And with that, you have concluded the TP Link firmware update process via TP Link app.
Coming across the TP Link firmware update stuck issue is no shocker. It is one of the most faced issues by TP Link extender users. We hope that we were able to help you resolve it with the above-given troubleshooting hacks.
On the off chance, you are still in the dire straits because of the same issue, contacting our technical experts would be the right decision to take. The reason being, they will surely help you resolve the issue at hand.