Troubleshooting Hacks to Fix TP-Link AC1750 Red Light Issue

At the time of the TP-Link AC1750 setup, you may see various LED lights on it. Each light has its own meaning. If the LED light on your wireless range extender indicates green it means that everything is perfect. But just in case, it flashes red then your extender caught some error. If you are not aware of how to resolve this TP Link AC1750 red light issue, then no need to worry. In this post, We will go over all the simplest troubleshooting hacks to fix the issue.

But, before that let’s make you aware of the reasons that are contributing to the issue in the first place. The reason being, knowing about the responsible factors, you’ll be able to tackle the problem easily.

Reasons Behind TP-Link AC1750 Red Light Issue

There can be various reasons that create TP-Link AC1750 red light issue. Some of them are given below:

• Poor Placement of wireless devices.
• The extender firmware is not updated.
• Faulty or loose power connection.
• Inappropriate power supply.
• Technical glitches.
• Weak internet connection.
• Interference from smart home appliances.

Fixed: TP-Link AC1750 Red Light Issue

Follow the below-mentioned hacks to fix the red light problem.

1. Power Cycle Your Extender

As we all know that technical hitches have the superpower to erect any issue including the one you are facing. But, the good news is that you can easily fix the issue with the simplest hack i.e. restarting. If you are not sure how to reboot the TP-Link range extender then go through the steps given underneath.

• Turn off your TP-Link extender and unplug it from the electrical socket.
• Wait patiently for a few seconds.
• Afterward, insert the wireless range extender into the power socket and turn on the switch.

2. Check the Ethernet Cable

The ethernet cable connection between the TP-Link WiFi extender and the home router must not be faulty or damaged. On the off chance it is, then replace the existing cable with the new one.

3. Place the WiFi devices Closer

The inappropriate location of the WiFi router and wireless range extender can also cause TP-Link AC1750 red light issue. To do away with this problem, place the wireless range extender and host router within the range. But, neither too close nor too far. The reason being, WiFi devices do not communicate with each other properly.

4. Check Power Supply

As we discussed earlier, an inappropriate power supply can also cause the red light problem. To troubleshoot this issue, be sure that your wireless devices get a fluctuation-free power supply from the wall socket. Just in case, if it is damaged then insert the extender into a different wall outlet.

5. Upgrade TP Link Extender Firmware

Do you remember when was the last time when you upgraded the TP Link wireless range extender firmware? Has it been long? Well, do not waste time and update the firmware. If you are not sure about how to upgrade your device, follow the guidelines mentioned below:

• Switch on the laptop and launch a web browser.
• Download the newest firmware for your TP-Link AC1750 extender.
• Thereafter, open a new tab on the browser and type the default web address in the location bar.
• Within a couple of seconds, the login window will come into view.
• Here, fill in the default admin credentials in the given fields.
• Once you logged in, the Quick Setup wizard will appear.
• Select Settings > System Tool > Firmware Upgrade
• Click on the Browse button.
• Once your device will find the firmware file, click on the Upload button.

6. Reset the Extender

If none of the above-mentioned troubleshooting tips help you to fix the issue, then it’s high time to reset the TP Link extender to its factory default settings. If you are not sure how to reset the wireless range extender, then follow the given below steps:

• Firstly, find the Reset button on the TP Link wireless range extender.
• Once you locate it, press it carefully.
• Wait for a few seconds.

That’s it! Do not forget to perform the TP-Link extender setup process again after the reset process.

Conclusion

We believe that you have resolved the TP-Link AC1750 extender issue successfully. Thank you for reading the post.